AvMap EKP III C Bedienungsanleitung PDF herunterladen (Seite 18)

on the display. There are three Cycle modes and hitting the Cycle Key one to three times activates

them. The Cycle Key is defaulted in the Cycle 1 position that normally activates all features to be

visible on the display. By hitting the Cycle Key once, Cycle 2 is activated and hitting it a secnd time

activates Cycle 3, one last Cycle key activation and the display is back to Cycle 1.

To set user preferences for the Cycle Key:

‘MENU’ + “SELECTIVE DISPLAY” + ‘ENTER’

The Cycles appear in the first three columns and are labeled 1, 2 and 3. In order to adjust at which

Cycle features appear, use the Cursor Control key to highlight an item and hit ‘ENTER’ to remove

the item from appearing. Hit ENTER again to check the item so that it will appear on the display

when that Cycle is activated. Continue to use this procedure to activate features in Cycles 1 - 3 as

desired.

The indication of the current de-clutter CYCLE is displayed on the data window

scale and north indicator field.

In any display condition, when pressing for more than 3” the CYCLE Key the result is:

a) Abort the current menu operation if any.

b) Return to the Moving Map Page.

c) Exit, eventually, the Cursor Mode and enter the moving fix (if the fix is currently available) mode

(normal navigation mode).

2.2 TURNING THE EKP-IV ON/OFF

Before powering On the EKP-IV, check for the correct voltage (10-35 Volt DC).

2.2.1 Turning On

Press and hold ‘POWER’ for 1 second. The EKP-IV emits one rapid beep sound and a Title page

containing information about the Product name, Software version, library version and cartridges

installed is displayed. This data can also be viewed in the “About” page in the “Main Menu”.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Keine Kommentare

AvMap EKP III C Bedienungsanleitung Seite 18